簡要描述:雷擊浪涌耦合/去耦網絡是針對綜合波在電源線上做抗擾度試驗的特點和要求而設計的配套設備。SGN-5010A/SGN-5010B是單相網絡,SGN-20是三相網絡。
產品型號: SGN-5010A/5010B/20
所屬分類:電力計
更新時間:2024-08-20
雷擊浪涌耦合/去耦網絡是針對綜合波在電源線上做抗擾度試驗的特點和要求而設計的配套設備。SGN-5010A/SGN-5010B是單相網絡,SGN-20是三相網絡。這三個網絡都可以用來與SG-5006組合。網絡的性能符合IEC61000-4-5和GB/T17626.5標準的要求.
耦合方式:電容耦合 | Coupling method: capacitor coupling |
耦合電容:9μF(共模試驗) 18μF(差模試驗) | Coupling capacitor: 9μF(common mode test) 18μF(normal mode test) |
去耦電感:1.5mH | Decoupling inductor: 1.5mH |
項 目 Item | SGN-5010A | SGN-5010B | SGN-20 |
耦合的浪涌波形 Surge waveform coupled | 綜合波(1.2/50μs電壓波,8/20μs電流波) Combination waveform(1.2/50μs voltage waveform, 8/20μs current waveform) | ||
zui大輸入浪涌電壓 Max. input voltage waveform | 6.6kV | ||
zui大輸入浪涌電流 Max. input current waveform | 3.3kA | ||
耦合方式選擇 Coupling mode choice | 手動操作 Manual operation | ||
被試設備容量 Power capacity of EUT | 單相,3線,220V,10A Single phase, 3 wire, 220V, 10A | 單相,3線,220V,20A Single phase, 3 wire, 220V, 20A | 三相,5線,380V,20A Three phase, 5 wire, 380V, 20A |
未加浪涌線上的殘余電壓 The residual surge voltage on unsurged line | 試品不接時,殘余電壓不超過所施zui大試驗電壓的15% Not exceed 15% of the max. applicable test voltage when EUT is disconnected | ||
電源線入口接的殘余電壓 The residual surge voltage on the power supply input of the decoupling network | 試品不接時,殘余電壓不超過所施zui大試驗電壓的15%或電源線峰值電壓兩倍 Not exceed 15% of the max. applicable test voltage when EUT is disconnected or twice for peak &#118alue of the power line voltage whichever is higher | ||
工作電源 Power in | AC 220V 50/60Hz | ||
環境溫度 Operating temp. | 15℃-35℃ | ||
重量 Weight | 25kg | 35kg | |
外形尺寸 Dimensions (D×W×H)mm | 460*520*240 | 460*520*310 |